Shell Type Carbon Steel Liquid Flow Divider

Min.Order: 1

Product origin: Guangzhou, Guangdong, China

Infringement complaint:

Complaint

US$ 200 ~ 2000

Description

Shell Type Carbon Steel Liquid Flow Divider

Descripition:

shell and tube heat exchanger is a class of heat exchanger designs. It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressuere vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids. The set of tubes is called a tube bundle, and may be composed of several types of tubes: plain, longitudinally finned, etc.So,it is also called Tubular Heat Exchanger.

Theory

Two fluids, of different starting temperatures, flow through the heat exchanger. One flows through the tubes (the tube side) and the other flows outside the tubes but inside the shell (the shell side). Heat is transferred from one fluid to the other through the tube walls, either from tube side to shell side or vice versa. The fluids can be either liquids or gases on either the shell or the tube side. In order to transfer heat efficiently, a large heat transfer area should be used, leading to the use of many tubes. In this way, waste heat can be put to use. This is an efficient way to conserve energy.

Shell and tube heat exchanger design:

Counter current heat exchangers are most efficient because they allow the highest log mean temperature difference between the hot and cold streams. Many companies however do not use single pass heat exchangers because they can break easily in addition to being more expensive to build. Often multiple heat exchangers can be used to simulate the counter current flow of a single large exchanger.

Applications and uses:
1.cooling of hydraulic fluid and oil in engines, transmissions and hydraulic power packs
2.heating other mediums,such as water,beverager,orange juice and other steam
3.they are extensively applied in chemical industrial,pertroleum and energy source and etc.

Design selection need to provide the following parameters:

The Heat Exchanger Tube Specifications Φ20
DN	Quantity of tube pass	Quantity of heat exchanger tube	Quantity of center raw tube	tube pass flow area(m²)	Heat exchanger area(m²)
					Tube length(mm)
					1500	2000	3000	4500	6000
159	1	15	5	0.0030	1.4	1.9	2.8
219	1	33	7	0.0066	3.1	4.1	6.2
273	1	65	9	0.0131	6.1	8.2	12.3	18.4	24.5
273	2	56	8	0.0056	5.3	7.0	10.6	15.8	21.1
325	1	99	11	0.0199	9.3	12.4	18.7	28.0	37.3
	2	88	10	0.0088	8.3	11.1	16.6	24.9	33.2
	4	68	11	0.0034	6.4	8.5	12.8	19.2	25.6
400	1	174	14	0.0350	16.4	21.9	32.8	49.2	65.8
	2	164	15	0.0165	15.5	20.6	30.9	46.4	61.8
	4	146	14	0.0073	13.8	18.3	27.5	41.3	55.0
450	1	237	17	0.0477	22.3	29.8	44.7	67.0	89.3
	2	220	16	0.0221	20.7	27.8	41.5	62.2	82.9
	4	200	16	0.0101	18.8	25.1	37.7	56.5	75.4
500	1	275	19	0.0553		34.6	51.8	77.8	103.7
	2	256	18	0.0257		32.2	48.3	72.4	96.5
	4	222	18	0.0112		27.9	41.8	62.8	83.7
The Heat Exchanger Tube Specifications Φ25
DN	Quantity of tube pass	Quantity of heat exchanger tube	Quantity of center raw tube	tube pass flow area(m²)	Heat exchanger area(m²)
					Tube length(mm)
					1500	2000	3000	4500	6000
159	1	11	3	0.0038	1.3	1.7	2.6
219	1	25	5	0.0087	2.9	3.9	5.6
273	1	38	6	0.0132	4.5	6.0	9.0	13.4	17.9
273	2	32	7	0.0055	3.8	5.0	7.5	11.3	15.1
325	1	57	9	0.0197	6.7	9.0	13.4	20.1	26.9
	2	56	9	0.0097	6.6	8.8	13.2	19.8	26.4
	4	40	9	0.0035	4.7	6.3	9.4	14.1	18.8
400	1	98	12	0.0339	11.5	15.4	23.1	34.6	46.2
	2	94	11	0.0163	11.1	14.8	22.1	33.2	44.3
	4	76	11	0.0066	9.0	11.9	17.9	26.9	35.8
450	1	135	13	0.0468	15.9	21.2	31.8	47.7	63.6
	2	126	12	0.0218	14.8	19.8	29.7	44.5	59.4
	4	106	13	0.0092	12.5	16.7	25.0	37.5	50.0
500	1	174	14	0.0603		27.3	41.0	61.5	82.0
	2	164	15	0.0284		25.8	38.6	58.0	77.3
	4	144	15	0.0125		22.6	33.9	50.9	67.9

1. Q: How long can we deliver goods?
A: 10-20days after payment.
2. Q: Where are our main markets?
A: Our main market are North and South America, Southeast Asia, the Middle East, Africa.
3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have very professional technical group who can design the special products according to your basic parameter/ data sheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are direct manufacturer leader in China, one manufacturing center is located in Guangzhou, another in Hubei Province
6. Q: Is OEM order acceptable to your company?
A: OEM is OK.

Forward

Related products