Description
PC16 Piezoresistive Silicon Pressure Sensor
Product overview PC16 piezoresistive silicon pressure sensor is the core component for the manufacture of pressure sensors and pressure transmitters. As high-performance pressure sensitive component, PC16 can be easily amplified and assembled into the pressure transmitters with standard signal output.
PC16 packages diffused silicon pressure sensitive die to 316L stainless steel housing. External pressure is transmitted to pressure sensitive die through stainless steel diaphragm and internally sealed silicon oil. Pressure sensitive die does not directly contact with measured medium, forming all solid structure of pressure measurement. So the product can be applied to a variety of occasions, including harsh corrosive medium environment.
PC16 uses O-ring for pressure seal, which is easy to install.
The company can also undertake special customization based on the needs of users, such as pressure sensors of all welded structure, wide temperature compensation, high reliability, anti-shock and anti-vibration sensors, especially for national defense weapons and equipment.
FeaturesWith constant current and constant voltage excitation options
Imported highly reliable pressure die
Wide temperature compensation
Normalized output available
Compensation board filled with glue for protection against moisture
Φ15.8mm standard OEM
All 316L material
High performance, all solid, high reliability
18 months warranty period
ApplicationsProcess control systems
Pressure calibration instruments
Refrigeration equipment and HVAC control
Hydraulic systems and valves
Level measurement
Biomedical instruments
Ships and navigation
Aircraft and avionics systems
Weaponry
Equivalent circuit Electrical performance parameters |
Pressure range | -100kPa~0~100kPa…25MPa |
Pressure reference | Gauge pressure, Absolute pressure, Sealed gauge pressure |
Excitation | 1.5mA recommended for constant current 10V recommended for constant voltage |
Input impedance | Constant current: 2kΩ~5kΩ Constant voltage: 3kΩ~18kΩ |
Electrical connection | Gold-plated KOVAR pin or silicon soft wire |
Compensated temp. | Constant current: -10ºC~70ºC Constant voltage: -20ºC~85ºC |
Operating temp. | -40ºC~125ºC |
Storage temp. | -40ºC~125ºC |
Insulation resistance | ≥200MΩ/250VDC |
Response time | ≤1ms (up to 90%FS) |
Measured medium | All the liquids and gases compatible with 316L. |
Mechanical vibration | 20g (20~5000Hz) |
Shock | 100g (10ms) |
Service life | 10×106 (cycles) |
Structural performance parameters |
Diaphragm material | 316L |
Housing material | 316L |
Oil filling | Silicon oil |
Sealing ring | NBR or fluorine rubber |
Basic parameters |
Item | Condition | Min | Nominal | Max | Unit | Note |
Nonlinearity | | -0.3 | ±0.2 | 0.3 | %FS | Note(1) |
Hysteresis | | -0.05 | ±0.03 | 0.05 | %FS | |
Repeatability | | -0.05 | ±0.03 | 0.05 | %FS | |
Zero output | | -2 | ±1 | 2 | mV | |
Full scale span output | 1.5mA 10V | 60 80 | 90 100 | 150 120 | mV | |
Zero temp. coefficient | | -1.5 | ±0.75 | 1.5 | %FS | Note(2) |
Span temp. coefficient | | -1.5 | ±0.75 | 1.5 | %FS | Note(2) |
Thermal hysteresis | | -0.075 | ±0.05 | 0.075 | %FS | Note(3) |
Long term stability | | -0.3 | ±0.2 | 0.3 | %FS/Year | |
Note:
(1) Calculate according to BFSL least square method. Negative pressure range is calculated in segments.
(2) In the compensated temperature range, refer to 30 ºC for 0 ºC ~ 60 and -10 ºC ~ 70 ºC, and 32.5 ºC for -20 ºC ~ 85 ºC.
(3) After passing high and low temperature, return to the reference temperature.
In mm
Electrical connection (in mm) |
Pressure range selection |
Code | Pressure reference | Pressure range | Overpressure | Burst pressure | O-ring |
100k | G, A | 0~100kPa | 200%FS | 500%FS | NBR |
160k | G, A | 0~160kPa | 200%FS | 500%FS | NBR |
250k | G, A | 0~250kPa | 200%FS | 500%FS | NBR |
400k | G, A | 0~400kPa | 200%FS | 500%FS | NBR |
600k | G, A | 0~600kPa | 200%FS | 500%FS | NBR |
1M | G, A | 0~1MPa | 200%FS | 500%FS | NBR |
1.6M | G, A, S | 0~1.6MPa | 200%FS | 500%FS | NBR |
2.5M | G, A, S | 0~2.5MPa | 200%FS | 500%FS | NBR |
4M | S | 0~4MPa | 200%FS | 400%FS | NBR |
6M | S | 0~6MPa | 200%FS | 400%FS | Fluorine rubber |
10M | S | 0~10MPa | 200%FS | 400%FS | Fluorine rubber |
16M | S | 0~16MPa | 200%FS | 400%FS | Fluorine rubber |
25M | S | 0~25MPa | 150%FS | 400%FS | Fluorine rubber |
N1k | Omitted | -100~0kPa | 300kPa | 600kPa | NBR |
N2k | Omitted | 0~-100kPa | 300kPa | 600kPa | NBR |
N3k | Omitted | ±100kPa | 300kPa | 600kPa | NBR |
N4k | Omitted | -100~160kPa | 480kPa | 900kPa | NBR |
N5k | Omitted | -100~250kPa | 750kPa | 1.25MPa | NBR |
N6k | Omitted | -100~400kPa | 800kPa | 2MPa | NBR |
N7k | Omitted | -100~600kPa | 1.2MPa | 3MPa | NBR |
N8M | Omitted | -0.1~1MPa | 2MPa | 5MPa | NBR |
N9M | Omitted | -0.1~1.6MPa | 3MPa | 9MPa | NBR |
N10M | Omitted | -0.1~2.5MPa | 5MPa | 12.5MPa | NBR |
Note: G: Gauge pressure, A: Absolute pressure, S: Sealed gauge pressure
Example: PC16-100kG4wI1C
Refer to PC16 pressure sensor, with pressure range 100kPa, gauge pressure, 4 wire, 1.5mA excitation and current compensation.
Ordering tips:1 Pressure range can be selected higher or lower than actual conditions but should be within ±30%FS.
2 Pressure reference consists of gauge pressure, absolute pressure and sealed gauge pressure.
- Gauge pressure is based on the current atmospheric pressure. Generally, it refers to the measurement of pressure which is greater than the current atmospheric pressure. Negative pressure is a special case of gauge pressure. It refers that there is such working condition that the pressure of work site is lower than the current atmospheric pressure.
- Absolute pressure is based on vacuum.
- As for sealed gauge pressure, PC10 uses absolute pressure die for gauge pressure product based on the atmospheric pressure of production site. For pressure range above 6MPa, gauge pressure cannot be selected, but only sealed gauge pressure.
3 Confirm the maximum overload of the applied system, which should be less than the overload protection limit of the sensor, otherwise it will affect the product life or even damage the product.
4 The commonly used compensation of the product is 1.5mA constant current compensation. Suggest to select the option with priority.
5 The material and process for manufacturing negative pressure sensors are different from those of positive pressure sensors. So gauge pressure sensors cannot be used as substitute of negative pressure sensors.
6 For special requirements on performance parameters and functions of the product, please contact us.
About Us:Certifications:
FAQ:1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.