Description
The thermal radiation of the sun, excessive heating steam or electric heating can make safety showers use point temperature becomes very high, the consumer to be scalded. (iron valve installed in the safety showers, eye bath and other medical devices may be excessive heating water system, 1, through the sense of water temperature in pipeline, the hot valve will automatically open, put off the hot water, when the temperature down to set temperature gradually closed again. This process will be circulation according to the need for, and at the same time of preventing hot discharge water to maintain minimum. 2, through the sense of water temperature in pipeline, when using the water temperature is less than 39, 40 degrees on iron valve will automatically open, when using the water temperature is higher than the 41 degrees, the hot valve automatically shut down, prevent heat the water out, cause harm to human body.)
Prevent hot valve, drain valve and temperature of technical parameters | Part NO. | Dimension | Body material | Temperature range | Max temperature(°C) | Max working pressure (MPa) | discharge coefficient
(Cv) | Dimension
(mm) | Net weight
(g) |
| 2602 | DN15/DN20 | SS or Copper | 36-41 | +110 | 1.0 | 0.1~0.6 | customized | customized |
Product safety characteristics1. The pure mechanical structure, is absolutely safe
2. A small amount of drainage can achieve prevent hot, definitely save money
3. Like the faucet installation is simple, convenient, the existing system is easy to transform
4. Open/close automatically, completely resolve the trouble of safety against the hot - save worry
5. Automatic flame state failure protection design
6. 304 stainless steel body, brass, rust, scale prevention design
7. The interface size: DN10 (G1/4, G1/2, G3/4)
8. The highest working temperature: 120 ° C
9. The maximum working pressure: 1 mpa
10. Flow coefficient Cv: 0.6
11. 100% products testing
Complaint
