Complaint
| Performance and Characteriestics |
| 1. Easy operation, flexible starting, accurate color register. |
| 2. the meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off. |
| 3. Pneumatic printing cylinder lift and lower, is will stir the printing ink automatically after lifting . |
| 4. the priting ink is spread by the anilox cylinder with even ink color. |
| 5. Reliable drying system coordinated with high- speed rotation, it will automatically break circuit wehn the machine stops. |
| 6.360° continuous and adjustable longitudinal register device. |
| 7. The frequency control of motor speed adapts to different printing speeds. |
| 8. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed. |
Machine Main Parameter
| Model | HR8-1000 |
| Printing material | PE,Plastic film |
| Machine Colors | 2-8 Color |
| Max. printing material width | 1050mm |
| Max. printing width | 960mm |
| Max. Printing length(repeat) | 7.5"~40"(190mm~1000mm) |
| Max. Mechanical speed | 150m/min |
| Max. Printing speed | 30-120m/min(one-side printing) 30-80m/min (double-side printing) |
| Register Precision | Crosswise: ±0.20mm; Lengthwise: ±0.20mm |
| Thickness of Plate | 1.14mm,1.7mm,2.28mm,2.84mm |
| 1 Set of Printing Cylinder on this machine | 400mm (8Pcs) |
| Machine overall dimensions(L *W*H) | 7.2m*2.4m*4.0m |
| Total machine power | 70Kw |
| Power | Voltage 380V, 3 PH, 50 Hz (or at client's require) |
| Type | Stack Type |
| Machine Colors | 2-8 Color |
| Principle of Work | Helical gears Drive, big gear in the center |
| Suitable Ink | Water-based ink or Oil-based ink |
| Printing Plate | Resin or Rubber |
| Constitution of Printing | Anilox roller, Rubber roller, Chrome plated roller, Printing cylinder |
| Anilox roller | Ceramic anilox roller 8pcs |
| Ink Running Way | Chambered doctor blade 8 Pcs( imported brand) |
| Ink motor | 90W, independent motor |
| Ink Supply Device | Two-way diaphragm pump, inksupply cycle |
| Rubber roller (Ink transfer) | 1 Set |
| Printing Pressure | Mechanical adjust |
| Adjusting of Register | By Manual |
| Printing plate lifting system | Automatic Hydraulic cylinder control printing roll up and down |
| Video inspection | Image inspection device 1 set |
