Raw material | |
material spec | GI,GL,PPGI,PPGL |
Thickness of coil sheet | 0.3-0.8 mm |
Efficiency width | According to the profile drawings |
Wave height | According to the profile drawings sizes |
Machine details | |
Roller material | Forming rollers adopt 45# steel with hard chrome plating ,coating thickness 0.05-0.06mm. after balance correction.And surface of rollers is grinded,polished and hard chromium plating with high precision.To ensure the smoothness of the chamfer, reduce the friction between the plate and rollers, and reduce the damage of the paint surface of the plate. |
Shaft material | Shafts of forming adopt 45# steel,after balance correction,are grinded,polished with high precision. Stainless steel dust shield is mounted on the outside of the bearings. |
Diameter of shaft | 75mm |
Main frame | 350 H steel |
Forming steps | 15 rows |
Productivity | 25m/min |
Vertical panel | 16mm |
Hydraulic station power | 10HP |
Hydraulic pressure | 10-12MPa |
Controlling system | famous PLC computer control |
Chain | 1 inch |
Material of cutting table | Cr 12 mould steel with quenched treatment |
Appearance size | 7800mm*1500mm*1550mm |
Weight | About 5.5 T |
Hydraulic oil | 40# hydraulic oil |
Electric tension | 440V 50 Hz 3 Phase or as your requirements |
1. What is your guarantee period?
Guaranteed against malfunctions due to manufacturing defects for 12 months from the date of loading.
2. Do you provide training for my workers?
The machine has been installed and tested well before shipping. It is easy to operate.
Normally speaking, our customer follows the instruction book and can operate the machine well.?
You can also come to our factory to check the machine and learn how to operate it before shipping. It only needs 2 hours and you can operate well.
3. I do not know about the machine and do not know how to install it. Can you install the machine in my factory?
If you need us to send engineers to your factory, you will pay for the travel expense such as visas, round tickets, hotels, and food Salary of 110 USD per day per person (from departure from our factory, until we are back to our factory). You also need to take care of his safety.
4. What is included in the machine?
The process for work: decoiler→feeding→roll forming→measuring length→cutting to length→product to stand
The whole line includes 1, a manual decoiler, 2, roll forming machine, 3 product stand and 4 spare parts list.