Complaint
Principle:
KJG double paddle dryer is a kind of contacting dryer. There is jacket on the body of dryer, hollow paddle strongly welded on two hollow shafts, filling heating medium (could be hot water, steam or thermal oil) in them, wet raw material is heated, dried as well as
driven forward by two shafts.
This is the paddle structure the orginal kind,we also have the improved type.
Below is the improved version,we use the round plate paddle,we also have the single paddle drye which is used for the material which with good liquidity,no sticky.
Principle:
YJG is the second generation double shaft paddle dryer developed by Jinling, the form of paddle could be round plate, half round plate or screw.YJG could be consisted of one to four shafts, whole operation will be finished in closed or partial closed environment.
Feature:
1 Drying efficiency could arrives 80%-90%. Heat transfer coefficient K is 100-
300Kcai/h.m 2 ºC . Evaporation capacity is 10-30Kcai/h.m 2 .
2 The dryer support continuous operation and batch operation, support vacuum
drying for thermal sensitive material and normal drying. Support heating,
evaporating and cooling.
3 Thermal oil, steam, hot water and chilling fluid are available to be used as
heating/cooling medium.
4 Special structure of paddle which has large heating area.
5 Structure of dryer is very compact, almost of the dryer could be transported by normal container.
We have our own processing equipment and process the paddle.we use auto welding machine to weld the paddle.
Paddle dryer production detail:welding
Insulation:we use Aluminum silicate.
Technical parameter
| No | double shaft | four shaft | |||||||
| Model | 5 | 15 | 60 | 80 | 100 | 150 | 200 | 300 | 500 |
| Heating area(m²) | 5 | 15 | 30 | 50 | 100 | 150 | 200 | 300 | 500 |
| Motor power(kw) | 4 | 15 | 37 | 45 | 55 | 90 | 110 | 180 | 264 |
| Note | Adopt different construction material and configure based on different feature of sludge | ||||||||
1. Q: Jiangsu Jinling Drying Technology Co., Ltd is a manufacturer, trading company or a third party?
A: We are a manufacturer, Our company established in 2000.
2. Q: Where is your factory located?
A: Jinling is located in Changzhou city, Jiansu province, China. it is In the middle of Shanghai and Nanjing.
3. Q: How can I go to your factory?
A: You can fly to shanghai Pudong or Hongqiao international airport directly, then take the high speed train to Changzhou station (just 1 hour from Shanghai to Changzhou by train) and we arrange to pick you up at Changzhou station to go to our company. Yutong company is around 30km away from Changzhou station.
If you are in China now, you can fly to Changzhou Benniu airport, or take train or bus to Changzhou city directly .
We sincerely welcome to visit our company at any time.
Pre-service
Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments.
1. Introduce the product to the customer in detail, answer the question raised by customer carefully;
2.Make plans for choice according to the needs and special requirements of users in different sectors;
Sale service
1. Ensure product with high quality and pre-degugging before delivery;
2. Delivery on time;
3.Provide full set of documents meet customer's requirements.
After-sale service
Provide considerate services to minimize clients' worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;
6.Provide technical support;
7.Establish long-term and friendly relationship.
Service commitment
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely
