Complaint
High thermal conductivity product based on Polyamide 6 ( Nylon PA6) Special filler Glass fibres
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
| Product Description | |
| High thermal conductivity product based on Polyamide 6 (PA6). Special filler. Glass fibres. | |
| General | |
| Form Resin Pellets | |
| Filler | Glass Fiber/Thermally Conductive Proprietary Filler |
| Feature Thermally Conductive | |
| Physical Nominal Value Test Method | |
| Density / Specific Gravity 1.91 g/cm³ ISO 1183 | |
| Molding Shrinkage, Across Flow(2 mm;60 MPa) 0.45 - 0.70 % ISO 294-4 | |
| Molding Shrinkage, Flow(2 mm;60 MPa) 0.35 - 0.60 % ISO 294-4 | |
| Mechanical Nominal Value Test Method | |
| Tensile Modulus(23 °C) 8500 MPa ISO 527-1/2 | |
| Tensile Stress, Break(23 °C) 120 MPa ISO 527-2/5 | |
| Elongation at Break(23 °C) 2.0 % ISO 527-2/5 | |
| C harpy Notched Impact Strength(23 °C) 4.0 kJ/m² ISO 179 1eA | |
| C harpy Unnotched Impact Strength(23 °C) 40 kJ/m² ISO 179 1eU | |
| Thermal Nominal Value Test Method | |
| Heat Deflection Temperature | |
| Unannealed;0.45 MPa 215 °C ISO 75-2/B | |
| Unannealed;1.8 MPa 195 °C ISO 75-2/A | |
| Vicat Softening Temperature 205 °C ISO 306/B50 | |
| Thermal Conductivity, Through Plane(Longitudinal) 1.2 W/m-K Internal Method | |
| Electrical Nominal Value Test Method | |
| Surface Resistivity 1.0E+14 ohms ASTM D257 | |
| Processing Nominal Value | |
| Melt Temperature 250 - 270 °C | |
| Mold Temperature 80.0 - 100 °C | |
| Drying Temperature 90.0 - 100 °C | |
| Dry Time 3 hr | |
Forever Co.,Ltd
