Partial Discharge Detect Transmission Line Test Equipment

Min.Order: 1

Product origin: Chongqing, China

Infringement complaint:

Complaint

US$ 3000 ~ 10000

Description

JF-2004 Partial Discharge Detect Transmission Line Test Equipment

JF-2004 Partial Discharge Detect Transmission Line Test Equipment is used for the detection and evaluation of the insulation status of high-voltage switchgear, ring network cabinets, transformers, GIS, overhead lines, cable terminals, cable branch boxes and other equipment.

Partial discharge intensity detection: By measuring the discharge signal within a power frequency period, the intensity of partial discharge is characterized according to the maximum value (dB) in the discharge pulse sequence.

Partial discharge frequency detection: The device measures the discharge signal within a power frequency period, extracts discharge pulses and characterizes the frequency of partial discharges according to the number of discharge pulses

Development and distribution enterprises

Railway system

Petrochemical power supply system

Aerospace testing field

Automatic testing field

TEV measurement		UHF measurement
Measuring range	0-60 dBmV	detection frequency	300-2000MHz
Resolution	1dB	measurement range	0-60 dBmV
Accuracy	±1dB	accuracy	<1dBmV
Maximum pulse per cycle	1400	Sensor band	300-2000MHz
Measurement frequency band	3~100MHz
AA measurement		AE measurement
Measuring range	-6dBμV - 68dBμV	Measuring range	-6dBμV - 68dBμV
Resolution	1dB	Resolution	1dB
Accuracy	±1dB	Accuracy	±1dB
Sensor center frequency	40 kHz	Frequency range	20~200 kHz
HFCT measurement
Sensor transmission impedance	5mV/mA
Detection frequency		1~30MHz
Sensitivity		≤50pC
Hardware
Shell		ABS
Display		4.0 inch RGB LCD screen
Controller		ARM
Connector		USB interface (also charger input) 3.5mm stereo headphone jack External ultrasonic sensor input wireless wifi Wireless synchronization benchmark
Earphone		minimum 8 ohm
SD card		standard 16G
Built-in battery		3.7V/1Ah lithium battery
Working time		about 8 hours
Charger		AC 90-264V or DC 5V
Operating temperature		-20 ~ 50ºC
Humidity		20-85% relative humidity
Weight		0.4KG(host)

Configure different sensors to realize partial discharge detection of almost all electrical equipment;

Humanized man-machine interface facilitates data management of different devices, including traceback of historical data change trends, horizontal and vertical data analysis, and realizes 360 ° comprehensive diagnosis of the device under test;

Built-in ultrasonic sensors and transient ground voltage (hereinafter referred to as TEV) sensors, which can be connected with special sensors such as transformers, GIS, overhead lines and cables;

Adopt non-intrusive detection method, no power failure during the test, maybe no high voltage source is applied, which is more convenient to use than traditional pulsed partial discharge detector;

The test bandwidth range is 30kHz ~ 2.0GHz, suitable for the detection principle of various frequency bands;

1. High Quality Product: Most equipment have been on sale for more than 10 years, they are stable, reliable, with high quality and good reputation. All the products have been tested, run well and adjusted to good condition before delivery

2. Good Faith Cooperation: Honesty is our foundation, we don't brag about the company and products, seek truth from facts, and don't make random promises.

3. Innovative Technology: Based on full experience in designing and manufacturing these equipment, and with users' feedback, we continuously improving our equipment and developing new products.

4. Awesome Service: Provide professional advice and reasonable offers within 2 hours at working time, and within 12 hours at non-working time. One year warranty for all the products, life time technical consulting, life time provision of spare parts, free software upgrades.

1. Warranty period for all products is One year;

2. Within warranty period, all quality problems of the instrument shall be repaired by our company free of charge;

3. Beyond warranty period, our company shall be responsible for life-time maintenance, only the cost of the accessories will be charged;

4. User manual will be sent with the tester, some testers have demo for review.

5. If users have question on operation, we supply on-line video training. Users can also come to our factory to get free training.

Forward

Related products