Complaint
A, AC Type RCBO 2p 4p Residual Current Circuit Breaker with Over Load Protection with CE, CB, SAA Approval and Testing Report 10-40A 30mA
| Standard | Unit | IEC/EN 61009-1 | |
Electrical features | Mode | Electro-magnetic type ,electronic type | |
| Type(wave form of the earth leakage sensed) | A, AC | ||
| Thermo-magnetic release characteristic | B,C,D | ||
| Rated current ln | A | 6,10,16,20,25,32,40 | |
| Poles | P | 1P+N, 3P+N | |
| Rated voltage Ue | V | AC 230, 400 | |
| Rated sensitivity I△n | A | 0.01, 0.03, 0.1, 0.3, 0.5 | |
| Rated residual making and breaking capacity l△m | A | 500 | |
| Rated short-circuit capacity Icn | A | 6000 | |
| Break time under I△n | S | ≤0.1 | |
| Rated frequency | Hz | 50/60 | |
| Rated impulsewithstand voltage(1.2/50)Uimp | V | 4000 | |
| Dielectric test voltage at ind.Freq for 1min | kV | 2 | |
| Insulation voltage Ui | V | 250 | |
| Pollution degree | 2 | ||
Mechanical features | Electrical life | 4000 | |
| Mechanical life | 10000 | ||
| Fault current Indicator | YES | ||
Protection degree | IP20 | ||
Ambient temperature (with daily average≤35ºC) | ºC | -5~+40(Special application please refer to temperature compensation correction) | |
| Storage temperature | ºC | -25~+70 | |
| Installation | Terminal connection type | Cable/Pin-type busbar/U-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-5 | ||
| Terminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Mounting | On DIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top |
FAQ
Q 1. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.
Thanks for your reading.If any product meets your need.Welcome to send us an email.We are sure your any information can be attentioned without any delay.
