Complaint
Main Composition | Polyester resin, Peroxide, Filling |
Technological Character | 1. This product is the modification epoxide resin polymer with outstanding age resistance. 2. Stronger tenacity, the product presents extraordinary hydrolysis resistance, damp proofing and chemoresistance after curing, and weatherability of it is fine(-30ºC-90ºC). 3. High thickness and unflown utilization ratio over 95%, it bears predominant earth proof, comprssion resistance, stretching resistance and shock resistance. 4. None corrosivity, it is harmless to human body, and it can be cleansed by soap when careless viscosed. 5.Its construction environment clean, comprehensive cost low, it reduces the procedure and expense for ashes and gravel transportation and for cleansing of rest mud. |
Application | It fits for the kind of stone material stick-up hanging glue, the old wall side without cutting and face lifting and the permanent stick-up of the lignum furniture. |
Color | White, Beige |
Directions | 1. The quota of A stack is equal to that of B stack. 2. Equal mixing and stirring(Note: stirring bottom). After equal mixing and stirring, the blare must be equal and the stone must also be completely stirred and mixed. 3. The mixed and stirred viscose must be used up in the valid time. Can't absolutely be used over the valid time. The higher the temperature, the shorter the effective time of its construction, and vice versa. 4. The viscosed parts can't be moved over the valid time of construction, if it need moving, the viscose must be mixed and stirred over again and then viscose the stone. |
Storage | It should be kept in dry and ventilated place(above 10ºC), closed over quickly after being used and group A, B should not contact with each other. The use period of validity is one year. |
Attentions | 1. You must make sure that the stickup area of each flagstone per m is not less than 104 cm² and the ply of used viscose not less than 3 mm. 2. The stickup surface should keep dry (the rate of water content is no more than 15%) and away from dust, oil and keep fastness not loosening. 3. If the stickup surface is too smooth, it must do rough processing And if there are some materials on the stickup surface which influence the stickup effect, that must be clear away. 4. In the low temperature construction below 10ºC in winterPF quick-dry viscose can only be used and the effective overtime in the construction is 5-6 minutes. 5. When the construction part temperature is below 5ºCthe stickup part can be heated up, but the temperature is no higher than 65ºC 6. In the welding installation, the weld should keep away from the stickup part over 3 cm. 7. When the stone products are loose and of many flaws the back of them should be covered with a flat of strong stone mending viscose to strengthen its rigidity and its waterproof. |
Packing Specifications | 1L/Set, 5L/Set, 10L/Set |
Variety of Product | PM slow dry style | PF quick dry style | |
Effective construction time | 45 minutes | 5 minutes | |
Primary dry time | 12 hours | 1 hours | |
Completely freezing time | 4 days | 6 hours | |
The Scope of the construct time | 10~70ºC | 0~70ºC | |
The character is stability after mixing | -30~90ºC | -30~90ºC |
