Sample Making Equipment Suitable for Ground and Ore Detection

Min.Order: 1

Product origin: Chengdu, Sichuan, China

Infringement complaint:

Complaint

US$ 45000 ~ 50000

Description

Guiheng XRF high frequency fusion machine
1. Equipment name: automatic high-frequency fusion machine
2. Model: GH-2ZC
3. Casting mode: automatic casting
4. Equipment composition and characteristics
XRF high frequency fusion machine is composed of heating system, control system, mechanical system and water cooling system.
The heating system uses the high frequency power supply made by our company to form eddy current on the platinum crucible, so that the platinum crucible induction heating;
The control system adopts touch screen display and input data, programmable logic controller (PLC) control, can store at least 10 kinds of samples, users only need to set according to the sample melting requirements: current and time (oxidation - temperature - constant temperature - rotation - molding) a few steps, and then gently press the start (screen built-in key) to complete a sample preparation process. If the X fluoroscope makes a curve according to this program, the curve program can be stored for calling.
The mechanical system adopts the self-developed "centrifugal variable speed mixing plus positive and negative rotation system" -- Patent No. : ZL 2010 2 0155249.7, to achieve constant changes in the mixing process, so that the sample and flux are fully mixed.
The water cooling system is composed of water pump, water tank and exhaust fan. The inlet temperature range of the cooling water system is 5-45ºC. Inlet pressure range: 0.1M Pa -- 0.3MPa, through circulating water cooling, to ensure that the electrical components in the equipment work normally;
Equipment characteristics
1) Easy to use: start up without preheating or heat preservation, 30 seconds from room temperature to more than 1000ºC, especially suitable for intermittent sample preparation.
2) Rapid sample preparation: Rapid sample preparation can be realized with fast heating speed. A batch of samples can be made in about 10 minutes, and continuous work can be done for 24 hours.
3) Safety and environmental protection: built-in exhaust fan to eliminate waste gas, no large area of thermal radiation is beneficial to the health of the operator.
4) Casting molding: reduce the crucible maintenance rate.
5) Low follow-up cost: no expensive consumables, no need to replace heating elements and refractory materials regularly.
6) Good energy saving effect: only heating crucible and mold.
7) Less platinum gold consumption: with a small number of crucible and mold can achieve the same output of other heating equipment.
8) Equipment protection: with water shortage, over current, over voltage, over temperature fault protection function.
9) Safe operation without thermal radiation: the whole working process of the equipment is to close the door and melt the sample, shut down and open the door, and sample at room temperature; Small heat source, crucible heating without thermal radiation, good working environment.
10) Combination structure design and assembly: all parts are carefully designed, compared and selected, replacement parts can be remote control guide maintenance.
11) Excellent fusion technology: guide and assist customers to explore and develop the fusion technology, help customers melt samples, at any time to help customers solve the difficult problems in the fusion sample

FIG. 1 Picture of the appearance of the equipment

FIG. 1 Photos of equipment interior decoration

5. Technical parameters

Unit type	GH-2ZC
Woek powe	AC220V/50Hz
Maximum output	0-6KW (fused and molded power supply output power)
Range of oscillation frequencies	50KHz-80KHz
Range of current regulation	35A-130A
Time adjustment range	0s-999s
Forming mode	Auto
Sample production per batch	2
Sample preparation speed	10 min/batch
Cooling water pressure	0.1-0.3MPa
Program storage	More than 10 groups
Fusion temperature	0-1300ºC (adjustable)
Temperature control accuracy	±1ºC
Stirring method	Centrifugal rotation + positive reversal (exclusive patent)
Rotational speed range ★	0-180 rpm / min (adjustable)
Speed change period ★	N. times / min (adjustable)
Infrared temperature measurement range	400ºC-1200ºC
Main dimensions (length, width and height)	1160×640×680mm
Host net weight	197kg
Tank shape size	800x540x920
Water tank net weight	90kg