1, Type:Tube Chipless Cutting Machine
2, Function: for Uncoiling, cutting, straightening tubes to cut-length tube without chip,etc.
It is mainly applied to the cutting of Air conditioning,Water heaters, etc materials.
Main parameters
Item | Parameter and specifications | Note | |
Processing materials | Material | Soft state, semi-hard, copper tube ,Al tube and steel tube | Or equivalent standard products |
pipe outside diameter and wall thickness | Ф1.8~Ф20,Wall thickness0.2~0.8mm | customized at needs | |
Coil dimensions | Ф900-1100 | ||
Processing capacity | Tube Cutting Number | 2 pcs | |
Cutting length | Min: 120 mm , Max: unlimited. | No pretensioning if <100 | |
Feeding Stroke | Continuous feed, unlimited length | ||
Productivity | 6 times /min(L=1000) | ||
Precision | Repeat length error | L≤1000 mm≤0.3mm L≥1000 mm ≤0.6mm | |
The necking rate of inner diameter | f < 20% (Original inside diameter - after-cutting internal diameter) / wall thickness | ||
Flatness | ≤0.5mm (L=1000) | ||
Surface | No significant pull, draw, crushed marks/scratch; No burrs | ||
Environment | Power supply | 3 phase 4 wire 380V \ 50Hz \ 1Kw | Isolation transformer |
Air pressure | 0. |
CNC or PLC | ICM CNC or Mitsubishi PLC |
Frequency converter | Mitsubishi |
Touch screen(HMI) | Mitsubishi |
Encoder | Nemicon |
Solenoid | AirTac |
Proximity switch and sensor | Autonics |
Low-volt electric parts | Siemens or IDEC |
Relay | IDEC |
Lead screw | TBI or NSK |
Guide rail | THK |