500MW High Power Outdoor Poe Router with 200 Meters Wi-Fi Range Can Meet The Demands for Outdoor WiFi Project Large Area Coverage

Min.Order: 100
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 1 ~ 36

Description
2.4GHz outdoor CPE work with our AC controller can transmit Wi-Fi signal in a certain place for outdoor users
 
Product Description

AP80Q is an 300Mbps high power outdoor CPE/AP with omni antenna; It Comply with IEEE 802.11b/g/n standard, adopt QCA9531 chipset, 16MB flash,64MB SDRAM, 5dBi omni antenna, 500mW high power, more than 200 meters Wi-Fi range, good choice for outdoor Wi-Fi signal coverage.
 
With AP, Router and Wi-Fi Repeater operation mode, it can transmit Wi-Fi signal in a certain place for outdoor users, or can bridge the exist Wi-Fi signal to extend the range.
 
AP80 with ABS waterproof, dustproof and sunscreen shell, temperature adaptive and board protective,suit for outdoor Wi-Fi networking projects.
Meantime, it support Power over Ethernet, support passive PoE/IEEE 802.3af PoE, easy in setup even no power socket nearby. With LED light show signal strength, easy to find a suitable place for outdoor CPE, save much human work and cost.
 
What's more, AP80 support multi SSID(up to 4), each SSID comply with IEEE 802.1Q VLAN, then AP80 work with our AC controller, easy to be configure and setup centrally, what's more, it support Portal Certificate, easy to do ads for users.

Main Features:
1 .Professional outdoor shell design,IP65 dust proof/water proof level.
Adopt ABS outdoor engineering plastic shell and industrial components,to provide IP65 level water proof ,dust proof and lightning protection,adapt to wind,sun,thunderstorm,snow and freeze or other adverse environments,even in extreme high and low temperature(-40ºC -  +70ºC)environment,can work normally and steadily as well .
2. With Qualcomm QCA9531 chipset
, Flash 8MB .DDR  64MB, greatly improved the data processing performance and allow more end users access
3. Independent external power amplifier circuit and low noise amplifier receiving circuit design.
4. Long wireless coverage ,transfer all kinds of data smoothly ,do not have any latency.
AP80Q is a high power  outdoor base station with 160 meters wireless range ,can meet the demands for outdoor wifi project large area coverage , specialize in high power design ,can ensure strong wireless signal and stable performance  .

5. RF power is adjustable according to the actual use environment .Reduce mutual WIFI interference between each other to improve wireless stability.

6. Multiple operation mode to meet the different wireless solutions .

 
Hardware Spec:
Hardware: 
ChipsetQCA9531 580MHZ 
Wireless802.11N, 2T2R  300M  MIMO Technology 
Memory64MB DDR2 RAM 
Flash16MB 
Interface2 10/100 Mbps RJ45 Port, support 12~48V PoE 
1 Reset Button 
1 DC Jack, 12V Power Supply 
Antenna5dBi omni Antenna 
IP LevelIP65 
LED LightPOWER  WIFI WAN LAN  S1(GPIO9) S2(GPIO14) S3(GPIO11) S4(GPIO12) 
SizeL 257mm , W: 87mm, H: 38 mm 
Power12V(POE 24V/48V)/1A;110V/220V 
RF Data 
RF Data802.11b/g/n: 
2.4~2.4835GHz 
Korea, Japan, ETSI, FCC 
ModulationOFDM = BPSK,QPSK, 16-QAM, 64-QAM 
DSSS = DBPSK, DQPSK, CCK 
Data Rate300 Mbps 
RF Output Power<29dBm 
Firmware 
Operation ModeGateway/AP/WiFi Repeater 
Protocol/StandardIEEE 802.3(Ethernet) 
IEEE 802.3u(Fast Ethernet) 
IEEE 802.11b/g/n(2.4G WLAN) 
WirelessAuto-Channel selection 
Distance Control (802.1x Ack timeout) 
Multiple SSID (4 SSID) 
BSSID 
SecurityWEP Encryption-64/128/152 bit 
WPA/WPA2 Personal (WPA-PSK using TKIP or AES) 
WPA/WPA2 Enterprise (WPA-EAP using TKIP) 
Hide SSID 
 System SettingWeb-based configuration (HTTP/Telnet)
 Firmware upgradeUpgrade firmware via web browser or TFTP
 AdministrationAdmin Password can be configured
 System monitoringStatus in hand , useful statistic and Event log
 LogSupports local logs, logs host, logs file export
 ResetReset or factory defaults
 BackupRestore settings & configuration of the device to local file
 Physical Property
 

Temperature
Working: 0°C~55°C
 Storage: -20°C to 70°C
 Humidity5%~95% (typical)
 
Antenna Specifications
ItemSpecifications




Antenna
 
Frequency Range2.4GHzGHz
Gain4dBi
V.S.W.R≤2
Impendance50Ω
PolarizationVertical
RadiationOmni

 

Company Profile

 

Product Tag:
Related categories:
Scroll to Top