6ep1336-3ba10 Stabilized Power Supply for Siemens PLC 1-Phase 24 V DC with 20A Stabilized Power Supply Input 120-230V AC 110-220V DC Output Unopened

Min.Order: 1
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 500 ~ 900

Description

6EP1336-3BA10 SITOP PSU8200 20 A stabilized power supply,1-phase, 24 V DC

Overview

The single-phase SITOP PSU8200 are technology power supplies for challenging solutions. The version with wide-range input allows a connection to almost any electricity supply network worldwide and ensures a high degree of safety even if there are large voltage fluctuations.

To further increase the 24 V availability, the SITOP power supplies can be combined with buffer, DC UPS, redundancy and selectivity modules.

Product highlights
  • Single-phase, 24 V DC/ 5 A, 10 A, 20 A and 40 A
  • Wide-range input, input voltage 85 … 132 V AC, 170 ... 264 V AC or 88 … 350 V DC
  • Up to 94% efficiency
  • cULus, cCSAus, ABS and DNV GL certifications

Data sheet 6EP1336-3BA10
SITOP PSU8200/1ACDC/24VDC/20A
SITOP PSU8200 20 A stabilized power supply input: 120-230 V AC 110- 220 V DC output: 24 V DC/20 A *Ex approval no longer available*
 Input 
type of the power supply network1-phase and 2-phase AC or DC
supply voltage at AC 
  • minimum rated value
120 V
  • maximum rated value
230 V
  • initial value
85 V; Derating of temperature necessary down to 50 °C at Vin < 100 V
 AC or DC
  • full-scale value
275 V
supply voltage 
  • at DC
110 ... 220 V
input voltage 
  • at DC
88 ... 350 V
design of input wide range inputYes
operating condition of the mains bufferingat Vin = 230 V
buffering time for rated value of the output current in the20 ms
event of power failure minimum 
operating condition of the mains bufferingat Vin = 230 V
line frequency 
  • 1 rated value
50 Hz
  • 2 rated value
60 Hz
line frequency45 ... 65 Hz
input current 
  • at rated input voltage 120 V
4.6 A
  • at rated input voltage 230 V
2.5 A
current limitation of inrush current at 25 °C maximum20 A
I2t value maximum5 A²·s
fuse protection typeYes
  • in the feeder
Recommended miniature circuit breaker at 1-phase operation: 10 A
 characteristic C; required at 2-phase operation: circuit breaker 2-pole
 connected or circuit breaker 3RV2711-1HD10 (UL 489) at 120 V or
 3RV2711-1ED10 (UL 489) at 230 V
 Output
voltage curve at outputControlled, isolated DC voltage
output voltage at DC rated value24 V
output voltage 
  • at output 1 at DC rated value
24 V
relative overall tolerance of the voltage3 %
relative control precision of the output voltage 
  • on slow fluctuation of input voltage
0.1 %
  • on slow fluctuation of ohm loading
0.3 %
residual ripple 
  • maximum
100 mV
  • typical
80 mV
 
voltage peak  
  • maximum
200 mV
  • typical
100 mV
adjustable output voltage24 V
product function output voltage adjustableYes
type of output voltage settingvia potentiometer
display version for normal operationGreen LED for 24 V OK
type of signal at outputRelay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"
behavior of the output voltage when switching onNo overshoot of Vout (soft start)
response delay maximum1.5 s
voltage increase time of the output voltage 
  • typical
50 ms
output current 
  • rated value
20 A
  • rated range
0 ... 20 A; +60 ... +70 °C: Derating 3%/K
supplied active power typical480 W
short-term overload current 
  • at short-circuit during operation typical
60 A
duration of overloading capability for excess current 
  • at short-circuit during operation
25 ms
constant overload current 
  • on short-circuiting during the start-up typical
30 A
product feature 
  • bridging of equipment
Yes; switchable characteristic
number of parallel-switched equipment resources for increasing the power2
 Efficiency
efficiency in percent93 %
power loss [W] 
  • at rated output voltage for rated value of the output current typical
42 W
 Closed-loop control
relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical0.5 %
relative control precision of the output voltage load step of resistive load 50/100/50 % typical1 %
setting time 
  • load step 50 to 100% typical
1 ms
  • load step 100 to 50% typical
1 ms
setting time 
  • maximum
5 ms
 Protection and monitoring
design of the overvoltage protection< 33 V
response value current limitation typical21.5 A
property of the output short-circuit proofYes
design of short-circuit protectionAlternatively, constant current characteristic approx. 23 A or latching shutdown
enduring short circuit current RMS value 
  • typical
23 A
overcurrent overload capability in normal operationoverload capability 150 % Iout rated up to 5 s/min
display version for overload and short circuitLED yellow for "overload", LED red for "latching shutdown"
 Safety
galvanic isolation between input and outputYes
galvanic isolationSafety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
operating resource protection classClass I
leakage current 
  • maximum
3.5 mA
  • typical
1 mA
protection class IPIP20
 Approvals
certificate of suitability 
  • CE marking
Yes
  • UL approval
Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
 
  • CSA approval
Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
  • cCSAus, Class 1, Division 2
No
  • ATEX
No
certificate of suitability 
  • IECEx
No
  • NEC Class 2
No
  • ULhazloc approval
No
  • FM registration
No
type of certification CB-certificateYes
certificate of suitability 
  • EAC approval
Yes
certificate of suitability shipbuilding approvalYes
shipbuilding approvalABS, DNV GL
Marine classification association 
  • American Bureau of Shipping Europe Ltd. (ABS)
Yes
  • French marine classification society (BV)
No
  • DNV GL
Yes
  • Lloyds Register of Shipping (LRS)
No
  • Nippon Kaiji Kyokai (NK)
No
EMC
standard 
  • for emitted interference
EN 55022 Class B
  • for mains harmonics limitation
EN 61000-3-2
  • for interference immunity
EN 61000-6-2
environmental conditions
ambient temperature 
  • during operation
-25 ... +70 °C; With natural convection; startup tested starting from -40
°C nominal voltage
  • during transport
-40 ... +85 °C
  • during storage
-40 ... +85 °C
environmental category according to IEC 60721Climate class 3K3, 5 … 95% no condensation
Mechanics
type of electrical connectionscrew-type terminals
  • at input
L, N, PE: 1 screw terminal each for 0.2 ... 4 mm² single-core/finely stranded
  • at output
+, -: 2 screw terminals each for 0.2 ... 4 mm²
  • for auxiliary contacts
13, 14 (alarm signal): 1 screw terminal each for 0.14 1.5 mm²
width of the enclosure90 mm
height of the enclosure125 mm
depth of the enclosure125 mm
required spacing 
  • top
50 mm
  • bottom
50 mm
  • left
0 mm
  • right
0 mm
net weight1.2 kg
product feature of the enclosure housing can be lined upYes
fastening methodSnaps onto DIN rail EN 60715 35x7.5/15
electrical accessoriesBuffer module
mechanical accessoriesDevice identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20
MTBF at 40 °C667 048 h
other informationSpecifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
 
Shenzhen Aimiqu Technology Co., Ltd is a high-tech enterprise integrating industrial control product sales, automation engineering design, development and transformation. There are reliable teams with our company, for a variety of industries automation process control needs, to provide reliable, efficient services and automation overall solution.

Shenzhen Aimiqu Technology Co., Ltd established in March 2016, the business scope including general management project is automation equipment accessories, instruments and meters, valves, switches, electronic semiconductor, electronic products, digital products, electronic components, communications products, computer software and hardware, security equipment, energy conservation and environmental protection products, intelligent household products; Operating electronic commerce; Domestic trade, import and export of goods and technology. Electrical automation import and export trade for the main business.

 Since its establishment, Aimiqu has been providing industrial automation services, providing customers with high-quality products and automation solutions. In the long-term business process, Emicic has established good partnerships with well-known international manufacturers .


  At the same time,Aimiqu attaches great importance to product research and development, invested a lot of funds, independent production and development of electrical equipment such as power distribution cabinet and put into use. For customers in product performance testing, automated production lines, electronic equipment, wire and cable, and other aspects of energy saving equipment reform and development, design, transform the multitude of automation equipment and automation control system, and provide a reliable and professional support, and pre-sale, sale and after-sale services - dragon, by the customer the consistent high praise.
Product Tag:
Related categories:
Scroll to Top