Product composition This fluorine release film is made of transparent PET (polyester film) as the base material and coated with fluorosilicone resin on one side. Product characteristics 1. Uniform coating and stable release force; 2. Small thickness tolerance and high transparency; 3. Low heat shrinkage and good flatness; 4. High residual adhesion rate (≥90%), no performance effect on the bonding material, no pollution; Product specifications 1. Width: 1060mm (can be customized according to customer requirements) 2. Length: 200m-3000m (can be slitted and rewound according to customer requirements) 3. Core inner diameter (paper tube or plastic tube): 3 inches (76.2mm) or 6 inches (152.4mm)
Scope of application It is applicable to silicone products (such as the bottom film of silicone products such as three-layer hot-pressing film, golden finger tape, high-temperature green tape, etc.; the die-cutting and punching of silicone products such as silicone protective film, PI tape, silicone double-sided adhesive tape, etc.). Scope of application It is applicable to silicone products (such as the bottom film of silicone products such as three-layer hot-pressing film, golden finger tape, high-temperature green tape, etc.; the die-cutting and punching of silicone products such as silicone protective film, PI tape, silicone double-sided adhesive tape, etc.). instructions 1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity. 2. In order to obtain the best use effect, it is recommended to use this product within 3 months from the purchase date; 3. It must be retested before use after expiration; 4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%. 5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.
Complaint
