High Efficient Injection Grouting Abrasive Sand Gravel Pump

Min.Order: 1
Product origin: Shijiazhuang, Hebei, China
Infringement complaint: complaintComplaint
US$ 990

Description
High Efficient Injection Grouting Abrasive Sand Gravel Pump

Product Description
 

General

AMG/AMGH sand gravel pumps, Construction of this pump is of single casing connected by means of clamp bands and wide wet passage. The wet parts are made of Ni hard and high chromium abrasion resistance alloys.

The discharge direction of pump can be oriented in any direction of 360 degrees.

This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion resistance

Drive types includes V-belts driven, flexible coupling driven, gear box driven, hydraulic coupler driven, variable frequency driven, thyristor speed control etc.

AMG/AMGH gravel pump are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries

in mining, explosive sludge in metal melting, grudging in dredger and course of river, and other fields. Type AMGH pumps are of high head ones





1. AMG Sand and Gravel pumps are horizontal centrifugal pumps, adopt special clamps clip tight pump body and pump cover. The discharge direction can be oriented in any direction of 360 degrees, easy installation and operation.
2. Bearing adopts cylindrical structure, easy for adjust the gap between impeller and pump body. It can be entirety dismantled when maintenance. Bearing lubricated by grease.
3. Compare with AM slurry pump, the sand gravel pump has spacious flow channel, better cavitation performance, much efficient, smaller hydraulic loss, also much more resistant to abrasion, high efficiency operation, can satisfy many kinds of bad transportation conditions.
4. Driving type mainly have V belt drive, elastic coupling drive, gear reducer drive, hydraulic coupling drive, variable frequency driven etc.
5. Dig deep advantage, good dig deep effect within 30 meters, maximum digging deep 40-50meters.
6. Using a variety of speed and modifications to make pump running under best condition. Long service life, high efficiency which can meet many poor transport conditions.

==Specification==: 

Size (discharge): 1" to 18" (25 mm - 450 mm) 
Capacity: To 3400 m3/hr
Head: T0 120 m
Particle Size: To 260 mm
Concentration: To 60%
Material: metal:High chrome alloy etc 


==Detailed specification==:

1. Horizontal, cantilevered, centrifugal, single stage sand dredging pump
2.Long bearing life: The bearing assembly is with large diameter shaft and short overhang.
3. Wear resistant and anti-abrasion wet parts: High chrome alloy and rubber etc. They are completely interchangeable with each other
4. Easily replaceable liners, Liners are bolted to the casing.
5. Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing housing.
6 Discharge direction can be positioned at intervals of 360 degrees.
7. Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple.
8. Sealing type: pcking seal,impeller sealing and mechanical seal.
9. Widely application: They are designed for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.
10.Certification:ISO,CE
11.Welcome OEM 

==Performance parameters==:

 
ModelOutlet Dia.
(mm)
Speed
(rpm)
Flow
(m3/h)
Head
(m)
Max Power
(kw)
Max Solid
(mm)
6/4D-AMG100600-140036-2507-566082
8/6E-AMG150800-1400180-54012-52120120
10/8F-AMG200500-1000180-82012-56560178
12/10G-AMG250400-850360-120012-60600220
14/12G-AMG300300-700700-27008-70600241
14/12TU-AMG300300-700700-27008-701200241
10/8F-AMGH200500-110050-90020-90560180
12/10G-AMGH250350-700500-200020-80600210
16/14TU-AMGH350250-5001000-280020-801200230

 
AMG Sand & Gravel Pump Structure


===Company Introduction===
 
Shijiazhuang An Pump Machinery Co., Ltd is one over 30 years experienced pump manufacturer (established at 1986) in mining and mineral, power plant, dredging and dredge, hydraulic, irrigation, pulp transfer, chemical, construction, sea water and oil & gas transfer etc.; An Pump Machinery is the pump factory has its own pump selection & design, research and development team to assure provide you efficient, energy saving slurry pump, water pump, diesel water pump, chemical pump and irrigation pump in selection & design, use and maintenance program.
 
An Pump Machinery is the pump factory approved by ISO9001, ISO14001 and OHSAS18001. We also have the certificate of CE. Our factory is over 50,000 square meters with the professional engineer over 20. The Max casting parts weight we could do one time is 7 tons. And we have capacity to produce 600 tons per month and with the heat treatment furnace dimension 6mx5.5mx2.5m. The Max parts we could machine is 6.4 meters and we have capacity to assemble the pump over 1800mm and our cranes capacity is 30 tons.
 
An Pump Machinery products include slurry pump, sewage pump, water pump, acid resistant or chemical pump, irrigation pumps, fire pumps and other products exported to over 90 countries all over the world. The application covers many fields, such as mining and mineral processing, dredger, tailings transportation, mining, steel, desulfurization pump, boiler feed water, construction, irrigation, water conservancy facilities, sewage treatment, drainage and water supply.
 
In the era of rapid development of science and technology, An Pump Machinery team take the entrepreneurial spirit "excellence and constant product quality, brand known worldwide and Credit-based", business purpose "the achievements of create brand enterprise and industry pioneer", to help you out and provide quality & cheap innovative products!
 

 

Company Information



FAQ 

Q1. Are you a manufacturer?
Yes, we have been in centrifugal pumps manufacturing and marketing industry over 32 years.
 
Q2. What markets do your pumps export to?
Europe, North & South America, South-East Asia, Africa, Oceanica, Middle East countries. Our overseas agent in Italy, Russia, America and Africa are gradually improving.
 
Q3. What information should I let you know if I want to get a quotation?
Please let us know the pump capacity, head, medium, operation situation, quantity, etc. As much as your provide, the precision and accurate model selection.
 
Q4. Is it available to print our own brand on the pump?
Totally acceptable as international rules.
 
Q5. How can I get the price of your pump?
You can connect with us through any of the following contact information. Our personalized service person will respond you within 24 hours.

>> Contact US:




Product Tag:
Related categories:
Scroll to Top