Description
New Technology Stainless Steel Material E-Coating Production Line Indoor environment requirement for coating:1. Room temperature: RT
2. Air speed: 0.3~0.6 m/s
3. Illumination: More than 500 Lx
4. Noise: Less than 85 dB
Coating line water drying:| No. | Item | Technical parameter |
| 1 | Structure type | Insert board assembly bridge type hot air circulation oven |
| 2 | Inner size | According to design requirement |
| 3 | Drying temperature | 110~150ºC |
| 4 | Drying time | 10~15 min |
| 5 | Fixed point temperature difference in drying tunnel | ±5ºC |
| 6 | Heating up time | <40 min |
| 7 | Installed power | 100000 Kcal |
| 8 | Energy | 0 # diesel or electric |
| 9 | Circulation air volume | 7000 m3/h |
| 10 | Waste gas discharge system | Equipped with regulating valve |
Electrophoresis coating system:Cathodic epoxy electro coating is highly corrosion resistant. A thin dry film thickness can withstand long time salt spray test.
Electrocoating has the ability to give very even coating with variances ranging to only 1-2 microns. E-coating assures the uniform of coating.
Coating line design parameter:
Complaint
