Complaint
Absolute Gauge Relative Piezoresistive Air OEM Air Gas Pressure Sensor with Welded Fittings MPM280
Description
General MPM280 Pressure Sensor
The outline, installation dimension and sealing method of General MPM280 is strongly interchangeable, it is widely used for measuring pressure which is compatible with stainless steel and FKM.
Assembled MPM280 Pressure Sensor
Put general MPM280 pressure sensor into the housing with standard or specialized thread; use face type seal or waterline seal; with flexible construction and strict inspecting and screening.
Welded MPM280 Pressure Sensor
Put general MPM280 pressure sensor into the housing with standard or specialized thread; and weld sensor with housing together, no O-ring for sealing. The whole product has flexible construction, it has wider application fields than general pressure sensor, and can be used for mounting and production of different pressure instruments.
Features
• Pressure range: 0bar ~ 0.2bar…1000bar
• Gauge, Absolute and Sealed gauge
• Constant current or Constant Voltages power supply
• Isolated construction to measure various fluid media
• Φ19mm OEM pressure element
• 316L Stainless steel material
• Tnegtive pressure measurement is available, the lowest to around -1bar
Application
• Industrial process control
• Level measurement
• Gas, Liquid pressure measurement
• Pressure meter
• Pressure calibrator
• Liquid pressure system and switch
• Refrigeration equipment and Air conditioner
• Aviation and Navigation inspection
Specifications
Order Guide
| MPM280(TS/TH/Ti)* | Piezoresistive OEM Pressure Sensor | |||||||||||||||||
| Range code | Pressure range | Ref. | Range code | Pressure range | Ref. | |||||||||||||
| 0B | 0~20kPa | G | 10 | 0~1MPa | G.A | |||||||||||||
| 0A | 0~35kPa | G | 12 | 0~2MPa | G.A | |||||||||||||
| 02 | 0~70kPa | G.A | 13 | 0~3.5MPa | G.S.A | |||||||||||||
| 03 | 0~100kPa | G.A | 14 | 0~7MPa | S | |||||||||||||
| 07 | 0~200kPa | G.A | 15 | 0~10MPa | S | |||||||||||||
| 08 | 0~350kPa | G.A | 17 | 0~20MPa | S | |||||||||||||
| 09 | 0~700kPa | G.A | 18 | 0~35MPa | S | |||||||||||||
| Code | Pressure type | |||||||||||||||||
| G | Gauge | |||||||||||||||||
| A | Absolute | |||||||||||||||||
| S | Sealed gauge | |||||||||||||||||
| Code | Pressure connection | Installation | ||||||||||||||||
| 0 or null | O-ring | |||||||||||||||||
| 1 | Assembled M20x1.5 male, waterline seal | Top: M24x1 male (P≤2MPa) | ||||||||||||||||
| 2 | Assembled M20x1.5 male, waterline seal | Top: M27x2 male | ||||||||||||||||
| 3 | Welded M20x1.5 male, waterline seal | Top: M24x1 male (P≤2MPa) | ||||||||||||||||
| 4 | Welded M20x1.5 male, waterline seal | Top: M27x2 male | ||||||||||||||||
| PC1 | Flush diaphragm M20x1.5 male, | Top: M24x1 female | ||||||||||||||||
| PC3 | Flush diaphragm G1/2 male, | Top: M24x1 female | ||||||||||||||||
| Code | Compensation | |||||||||||||||||
| L | Laser trimming | |||||||||||||||||
| M | Outer compensated resistor (providing resistor value) | |||||||||||||||||
| Code | Electric connection | |||||||||||||||||
| 1 | φ0.5mm Kovar pin | |||||||||||||||||
| 3 | 4-color flexible wire, default length:100mm | |||||||||||||||||
| Code | Special measurement | |||||||||||||||||
| Y | Gauge sensor to measure vacuum (0~ -100kPa) | |||||||||||||||||
| MPM280 09 G 0 L 1 Y The whole spec | ||||||||||||||||||
