Complaint
Ethernet PLC
Simple panels, easier to integrate into your equipment
Built-in Web Server
With embedded configurable sensor
The built-in RS485 interface makes communication more convenient
Support for MQTT protocol, data access to the IoT cloud service directly
Specific characteristics
| Module | PR-12AC-R-N | PR-12DC-DA-R-N |
| Input | I1--IC: 8DI(AC) | I1--I4 : 4DI/AI (0--10V signal) I5--I8 : 4DI/HSI |
| Output | Q1--Q4 ( RELAY 10A 250VAC /5A 30VDC) | |
| Supply | AC 110~240V | DC 24V |
| Weight | Approx. 350g | Approx. 300g |
| Dimensions | Without packing: 95mm*90mm*61mm With packing: 107mm*96mm*73mm | |
| Expansion | YES(16PCS in max) | |
| Products certification | CE |
| Conformity with the low voltage directive (in accordance with BT 2006/95/EC) | IEC/EN 61131-2 |
| Conformity with the EMC directive (in accordance with 2004/108/EC) | IEC/EN 61000-6-1 (Residential, commercial and light-industrial environments) IEC/EN 61000-6-2 (Industrial) IEC/EN 61000-6-3 (Residential, commercial and light-industrial environments) IEC/EN 61000-6-4 (Industrial) |
| Protection rating | In accordance with IEC/EN 60529: IP20 |
| Overvoltage category | 3 in accordance with IEC/EN 60664-1 |
| Mechanical resistance | Immunity to vibrations IEC/EN 60068-2-6 Immunity to shock IEC/EN 60068-2-27 |
| Resistance to electrostatic discharge | IEC/EN 61000-4-2 Severity 3 |
| Resistance to HF interference | Immunity to radiated electrostatic fields IEC/EN 61000-4-3 Immunity to fast transients (burst immunity) IEC/EN 61000-4-4, level 3 Immunity to shock waves IEC/EN 61000-4-5 Severity 3 Radio frequency in common mode IEC/EN 61000-4-6, level 3 Voltage dips and breaks (AC) IEC/EN 61000-4-11 Immunity to damped oscillatory waves IEC/EN 61000-4-12 |
| Conducted and radiated emissions | Class B in accordance with EN 55022 |
| Operating temperature | -25 ~ +55°C in accordance with IEC/EN 60068-2-1 and IEC/EN 60068-2-2 |
| Storage temperature | -40 ~ +70ºC in accordance with IEC/EN 60068-2-1 and IEC/EN 60068-2-2 |
| Relative humidity | 10 ~ 95 % . (no condensation or dripping water) in accordance with IEC/EN 60068-2-30 |
| Mounting | On 35 mm standard mounting rail, 4 MW, or wall-mounting |
| Screw terminals connection capacity | Flexible wire with ferrule 1 conductor: 0.25 to 2.5 mm2(AWG 24 ~AWG 14) |
| Module | PR-12AC-R-N | PR-12DC-DA-R-N |
| Program size function blocks (FBD) | 512 function blocks | |
| Memory size function blocks (FBD) | 32K | |
| LCD display | 4 lines of 16 characters and configurable backlighting | |
| Programming method | Function blocks | |
| Program memory | Flash EEPROM | |
| Back-up time in the event of power failure | Program and settings in the controller: 10 years Program and settings in the plug-in memory: 10 years Data memory: 10 years | |
| Cycle time | FBD: typ. 0.6ms ~ 8.0ms | |
| Response time | Input acquisition time: + 1 to 2 cycle times | |
| Clock data retention | 25°C typ. 20 days | |
| Clock Drift | typ. ± 2 s/day | |
| Timer block accuracy | time base :s(Second) Resolution : +10 ms time base :m(Minute) Resolution: +1 s time base :h(Hour) Resolution: +1 min | |
| Start up time on power up | Typ. 4s | |
| Module | PR-12AC-R-N | PR-12DC-DA-R-N |
| Supply | ||
| Nominal voltage | 110 ~ 240 V ac | DC 24V |
| Operating limits | 85 ~ 265 V ac | DC 20.4-28.8V |
| Supply frequency range | 47 ~ 63 Hz | NO |
| Max. absorbed power | 49 mA (85V ac) ; 37 mA (265V ac) | 2.1W (10.8V dc) 2.8 W (28.8V dc) |
| Isolation voltage | 1780V ac | None |
| Inputs | ||
| Input voltage | 110 ~ 240 V ac | DC0-28.8V |
| Input current | 0.08 mA ; 85 Vac 0.25mA ; 265 V ac; | 0.4mA ; 10.8V dc 0.5mA ; 12.0 V dc 1.2mA ; 24 V dc 1.5mA ; 28.8 V dc |
| Resolution Ratio (Analog Input) | None | 0.01V (0~10v) |
| Accuracy at 25 °C (Analog Input) | None | ±0.02V |
| Logic 1 voltage threshold | >79 VAC; >0.06mA | > 8 VDC;>0.3mA |
| Logic 0 voltage threshold | < 40 VAC | < 5 VDC;<0.1mA |
| Input Response Time | Delay time at 0 to 1: 120V AC :Typ. 50 ms 240V AC:Typ. 30 ms Delay time at 1 to 0: 120V AC :Typ. 90 ms 240V AC:Typ.100 ms | Delay time at 0 to 1: I1--I4:Typ. 2.5 ms I5--I6:Typ. 1.5 ms Delay time at 1 to 0: Typ. 1.5 ms |
| Maximum counting frequency | Typ.:4 HZ | Typ.:4 HZ; HSI: 60kHZ(I5--I8) |
| Sensor type | Contact or 3-wire PNP | |
| Input type | Resistive | |
| Outputs | ||
| Rated voltage | AC 250 V / DC 30 V | |
| Rated current | AC 250 V: 10 A DC 30 V ; 5A | |
| Electrical durability Expectancy | 105 Operations at Rated Resistive Load | |
| Mechanical life | 107 Operations at No Load condition | |
| Response time | Operate Time : 15 mSec. Max. Release Time : 10 mSec. Max. | |
| Frequency (Hz) | resistive load : 2 Hz inductive load : 0.5 Hz | |
| Communication ports parameters: | ||
| COM0_TTL port | COM0 : optional RS232/RS485 (via accessories :RS232 CABLE/PRO-RS485) Band Rate:4800;9600;19200;38400;57600;115200 Communication Protocol:MODBUS RTU;MODBUS ASCII | |
| Ext RS485 | COM1: optional RS485 (Via PR-RS485 expansion module) Band Rate:4800;9600;19200 Communication Protocol:MODBUS RTU;MODBUS ASCII |
| Built-in RS485 | COM2: Built-in RS485 Band Rate:4800;9600;19200;38400;57600;115200 Communication Protocol:MODBUS RTU;MODBUS ASCII |
| Ethernet port: | Built-In(10M/100M), 1.Can be used as program or communication 2.Can be used as modbus master or slave Communication Protocol:MODBUS TCP RTU ;MODBUS RTU |
| Monitoring webserver page | Yes |
| Xlogic<--->Xlogic(by Ethernet) | 1 xlogic works as tcp server can connect with 8 tcp client xlogics or other tcp devices. |
| Xlogic<--->Ethernet/Internet: | 1 xlogic works as TCP clients can connect with 8 different tcp servers separately in maximum |
Notes:
1.Ethernet interface configuration software is " DeviceManager for Ethernet CPU".
2.Programming software is eSmsConfig.
