10 Cbm Automatic Ethylene Oxide Gas Sterilizer

 

Ethylene Oxide Sterilizer Machine Manufacturer
Description of ethylene oxide sterilizer 
The range of large-scale HTAJ3 ethylene oxide sterilizer is a kind of low-temperature sterilization equipment: This product is designed by using advanced computer technology, automation technology, welding technology and process on the basis of absorbing the advantages of similar products at home and abroad.
Precautions
(1) Installation requirements of ethylene oxide sterilizer: The ethylene oxide sterilizer must be placed in a well-ventilated place, and it must not be placed near a fire source. In order to facilitate repair and regular maintenance, 51cm space should be reserved on each side (including the top) of the ethylene oxide sterilizer. Special exhaust pipes should be installed and completely isolated from other exhaust pipes of the building.
(2) Ethylene oxide safety protection principles and precautions:
1) Keep ethylene oxide sterilizers and cylinders or cans away from sources of ignition and static electricity.
2) Ethylene oxide storage should be free of ignition sources, no rotating motor, no sun, good ventilation, and the temperature is lower than 40 ºC, but it should not be placed in the refrigerator. Dispose of in strict accordance with the relevant national storage requirements for flammable and explosive materials.
3) Do not use too much force when administering or opening the bottle, so as not to spray the liquid.
4) Monitor the air concentration of the ethylene oxide working environment every year.
5) Ethylene oxide staff should be trained in expertise and emergency management.

Product forms	HTAJ3 manual door cabinet
Power source	AC380V,50Hz
Sterilizer size	(Length × width × height): 2600×1400×1400mm
Sterilizer volume	6m³
Sterilizer interior material	304 Anticorrosive stainless steel
Outer carton material	Carbon steel
Temperature during sterilization	50ºC ±3ºC
Working pressure	-60kpa
Maximum anti-stress value	-150kpa
Humidity during sterilization	45%-75%
Pressure sensor	The built-in pressure sensor automatically detects the pressure inside the cavity to ensure that the pressure in the cavity is accurate and effective.
Ethylene oxide sterilization concentration	1g/L Adjustable
Leakage rate of sterilization chamber	The leakage rate is measured under the conditions of no-load and constant temperature in the sterilization chamber, the test pressure is -50kPa, and the measurement time is 1h. The average leakage rate within the measurement time is ≤0.16kPa / min.
Sterilization time	0-99 hours Adjustable
Vacuum speed	15-25 minutes to -60kpa
Air replacement	Automatic ventilation, ventilation times and interval time can be set freely
Automatic control system	One-key start to end, the whole process of automatic completion with printing records
Display status	Display temperature, humidity, pressure, sterilization time, residual gas treatment time, frequency
Printer	Record and print the sterilization information of the whole process for verification.
Humidity sensor	The built-in humidity sensor automatically detects the humidity in the cavity to ensure that the humidity in the cavity is not less than 45% RH.
Residual gas treatment device	The removal rate of the filter with a particle diameter ≥ 0.3 μm is not less than 99.5%.
Temperature sensor	The built-in temperature sensor automatically detects the temperature in the cavity to ensure that the temperature in the cavity is maintained within an accurate range of 50 ° C ± 3 ° C.
Humidification system	Pulse humidification under vacuum to ensure that the humidity in the cavity is uniform and controllable; the humidity in the sterilization chamber should be controlled within the range of relative humidity 45% -80%;
alarm system	High temperature alarm system, ultra-low pressure alarm system; When the sterilization temperature of sterilization chamber exceeds 59ºC, the alarm shall be audible.
Vacuum rate	Under no-load condition, the time for the sterilization cabinet to vacuum from atmospheric pressure to -60kpa should be ≤30min.
Vacuum system	The use of oil-free vacuum pump, simple and convenient, fast vacuum rate, long service life.
Multiple protection functions	With over - pressure and over - temperature protection function, more safe and reliable.
Heating system	Adopt explosion-proof electric heating device, more convenient and fast

If you want to know more about our Medical Ethylene Oxide Sterilizer with Stainless Steel.you can give an inquiry.

The Group relies on aggregating professionals in the field of medical equipment, concentrated technical forces to invest in research and development, and rapidly rises in the medical field. With great investment in research and development and innovation, the company has achieved a series of results in the related fields of ethylene oxide sterilizers. Combined with the 5G intelligent AI platform to realize the intelligent operation of the equipment, the simplicity, safety, and sterilization effect exceed the customer's requirements. We always treat our customers with a high standard and a responsible attitude. The corporate philosophy of being a person first, and then acting, has laid a solid foundation for the group company to deepen its cultivation in the medical device industry.