Yt11 Direct Acting Threaded Ends Pressure Reducing Valve

Min.Order: 1

Product origin: Wenzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 1

Description

YT11 Direct Acting Threaded Ends Pressure Reducing Valve

Brief Introduction.

YT11 Direct Acting Threaded Ends Pressure Reducing Valve for Water/Steam/Gas is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc. The Bellows inside also ensured the high sealing performance of the valve.

Field of Application.

Product Name:Direct Acting Pressure Reducing Valve.
Pressure Rating: 1.6- 2.5 Mpa.
Nominal Diameter: DN15-25 mm.
Body Material: CF8.
Standard Screwed: NPT,BSP.

Working Principle.

This reducing valve is direct acting bellows reducing valve,mainly composed of valve seat,valve flap(steel ball),corrupted tube combined component and spring.Set the outlet pressure through adjusting spring,the opening of valve flap enlarged when the outlet pressure reduced,the opening of valv flap decreased when the outlet pressure reached to the set pressure.The valve pressure of the medium acts on the area of corrupted tube and transdue to the adjusting spring,realizing the function of pressure reducing and regulating.This reducing valve is designed in meet of the need of energy saving.It has the characteristics of multi-function and light.It is widely applied on water,steam,air,oxygen,liquefied gas pipe of factory and hotel.You can adjust the pressure by rotating the plastic hand wheel,no need to use tool,the connection and installation is very convenient.The internal structure use corrugated tube,the sealing face has filtering mesh protecting device,which protect the internal parts from damage and greatly prolong the service life.

Material of Main Component.

Name of Component	Material of Component
Valve Body, Bottom Cover	CF8
Valve Cover	Casting Aluminium Alloy,CF8
Valve Flap,Valve Rod, Valve Seat	CF8
Bellows	1Cr18Ni9Ti
Hand Wheel	Heat-Resistant Plastic
Spring of Main Valve	50CrVA
Adjusting Spring	60Si2Mn

Main External Dimensions.

DN	G	L	H1	H	D
15(1/2")	Rc1/2"	95	55	170	100
20(3/4")	Rc3-4"	95	55	170	100
25(1")	Rc1"	100	60	190	120
32(1-1/4")	Rc1-1/4"	165	75	220	150
40(1-1/2")	Rc1-1/2"	190	90	250	180
50(2")	RG2"	200	110	300	220

Main Technical Parameters and Indexes of Performance.

Nominal pressure	PN1.6 Mpa
Tested pressure of shell	2.4 Mpa
Sealing test pressure	1.76 Mpa
Max. inlet pressure	1.6 Mpa
Pressure range of outlet	0.05-1.0 Mpa
Min. differential pressure	0.15 Mpa
Medium	Water, steam, liquid, air, oxygen, nitrogen, etc.